The Ultimate Guide to Alarm System Installation

The Ultimate Guide to Alarm System Installation

An alarm system is used in residential, commercial, industrial, and military properties for protection against burglary, property damage, intrusion, and unauthorized entry. You can install a security system yourself. But you have to consider the cost, time, and effort should you take this route.

Alarm systems are complicated and the technology is advanced. You will need to give it at least 10 hours of your time to get everything set up.

If you think it’s not for you, consider hiring a skilled alarm installer near you in Sonoma for the job. However, if you want to do it on your own, here’s a step-by-step guide to help you through the process:

Set Up a Central Control Panel & Keypad

The central control panel is the “brain” of your alarm system and functions as the central point. It’s where your sensors and accessories communicate with each other so that the security system knows when to set off alarms and notify the monitoring center. The central control panel is what makes everything tick, so you need to make sure that it’s installed correctly. It should be installed in a location that is easy to access, but not so easy that it can be accessed by anyone who passes by.

Install the Window & Door Contacts

Door and window contact sensors are typically installed on every exterior door and any windows that can be accessed from ground level. Door contacts are installed as part of the door frame on the side jamb where the door closes, while window contacts are installed on either side of the window frame or near the top corner of both frames. You can simply stick the magnet to the door or window frame with double-sided tape or adhesive putty.

Place Motion Sensors

They detect movement inside your home when the system is armed, alerting the control panel and triggering the alarm if they sense something amiss. Ensure that they aren’t placed in areas where they will detect regular household activity, such as pets and family members walking past them.

Test Your Sensors and Accessories

Once all of your sensors and accessories are installed, you will want to test them out to ensure they are working correctly. It is a crucial and necessary step to take before you program your control panel so that you know what each zone number corresponds to before you continue with the installation process.

Program Your Control Panel

Programming your control panel refers to assigning zone numbers and activating features on the control panel itself. Some features may be activated by default, while others may require a bit more involvement to set up. Also, make sure to use a secure, unique passcode that you will remember and cannot be easily guessed.

Looking for installing a security system that can help keep your home and family safe and give you peace of mind? Call Sync Systems at (707) 799-9558 to talk to our professional alarm installer near you in Sonoma.

    All Inquiries​